How to use VA BOX and precautions for use
Thank you for purchasing VA BOX!
This page explains how to use VA BOX and precautions to take when using it.
When you receive your VA BOX, first check that all accessories are included.
The package contains the following items and a "HOW TO USE" sheet of paper.
①VERSUS VS-2043NDDM VA BOX original design 1 piece
② 3 small trays
→If you put a sponge inside, you can use it to store spoons, and if you don't put a sponge inside, you can use it to store plugs.
③ Large tray with utility space 1 piece
→ A tray with utility space that can be used to temporarily store pliers and lures.
④ 1 large tray
→Tray for storing plugs.
⑤ 5 sponges
→Store the spoon in a set with ②.
⑥ VA BOX lid holding block 2 pieces
→This block prevents the lid of the VA BOX from tipping backwards when opened. (The color will be black at the time of delivery.)
⑦Male and female Velcro set (2 pieces)
→Can be used to attach hook cases, exchangers, etc. to the lid
Once you have everything, place it in the box.
First, use step ⑥ to prevent the lid from falling backwards.
This is ⑥. At the very last moment, I had the color changed to black.
Peel off the double-sided tape
Stick it in the recess on the back of the box.
We recommend degreasing the box side before applying the sticker to prevent it from peeling off.
You can degrease using things you have at home, so try searching for them.
There are two attached.
If you open the lid in this state, it will not fall backwards.
Next, we will set the contents.
First, create a spoon storage space using the small case ② and the sponge ⑤.
The sponge is set to a tight grip, which prevents the sponge from lifting up when you pick up the spoon.
Once everything is in, press down firmly from the top.
Once done, place it in the back left corner of the bottom shelf of the box.
Next, place another ② in the front left corner of the bottom row and ④ in the right half of the bottom row.
The bottom row is now complete.
Next is the upper level.
On the top shelf, place ② small case in the front left and ③ large tray with utility space in the right half.
This completes the setup of the device.
Now we'll set the lid.
First, attach the female end of the Velcro tape (7) to the lid.
Attach two pieces.
(Either female or male is fine, but I chose the female one because the back of the optional "magnet" has male Velcro.)
Next, cut the male part to the correct size and attach it to the item you want to attach it to.
That's it.
We will also use FULLCLIP's M-size exchanger in the same way.
This completes the VA BOX setup!
Next, we will introduce some tips to make better use of the VA BOX.
②Small tray
It is suitable for small plugs. It has many divisions, so you can separate plugs by type, such as F or S.
③Large tray with utility space
It is similar to the large tray (4), but it is a tray exclusively for the upper shelf. Its distinctive feature is the utility space.
The cutout in the utility space can be used to store partially used lures and other items.
④ 1 large tray
This tray is for the lower shelf and is suitable for storing large plugs and other items.
There are currently many types of plugs on the market, and if you try to use one type of plug per compartment, you may not have enough compartments.
In that case, you can create an "F room" and store SR-F and DR-F together, or store Fs with different plugs in the same compartment, which will allow you to store them efficiently.
＜Part 3＞Arrangement of the main body
[I want to secure as much spoon storage space as possible]
Remove the small case ② on the top left and place it in the small case ② on the bottom left.spongeAdding this will increase the amount of spoon storage you can have.
[I don't have many large plugs]
④Large tray on the right side of the bottom② 2 small traysIt is also possible to change it to.
I'm wondering what to put on the lid.
As an optional itemmagnetWe have prepared the following.
The male (serrated) part of the Velcro is on the back, so just attach it to the Velcro on the lid.
It is convenient to be able to store pliers and line cutters on the lid.
In addition, please feel free to customize it however you like to make it easier for you to use.
If you have any questions, please contact us via our official LINE.
・Acrylic sheets are cut and welded by hand one by one by craftsmen. Therefore, there may be some misalignment. If the misalignment is a concern, we will consider replacing it, so please take a photo and contact us via our official LINE account.
- Using the product in extremely hot or cold places may cause damage.
- The product is made of 2mm thin acrylic, which may be damaged if dropped from a high place.
・The outer box is made of a material that is easily scratched. Items with large scratches will be rejected during inspection, but there is a possibility that minor scratches may be present at the time of delivery. Thank you for your understanding.
t-Route